================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了使用TIM1输出三路频率为10Hz占空比分别为25%、50%、75%的PWM波形以及他们
的互补信号。

Function descriptions:
This sample demonstrates the generation of three PWM waveforms with 
frequencies of 10Hz and duty cycles of 25%, 50%, and 75% using TIM1. 
It also generates their complementary signals.
================================================================================
测试环境：
测试用板：PY32MD530_STK
MDK版本： 5.28

Test environment:
Test board: PY32MD530_STK
MDK Version: 5.28
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行
2. 使用逻辑分析仪观察引脚PA8/PA7/PA9/PB0/PA10/PB1的波形

Example execution steps:
1.Compile and download the program to the MCU, and then run it.
2.Use a logic analyzer to observe the waveforms on pins PA8/PA7/PA9/PB0/PA10/PB1
================================================================================
注意事项：
PA8  -> CH1  占空比：25%
PA9  -> CH2  占空比：50%
PA10 -> CH3  占空比：75%
PA7  -> CH1N
PB0  -> CH2N
PB1  -> CH3N

Notes:
PA8  -> CH1 Duty cycle: 25%
PA9  -> CH2 Duty cycle: 50%
PA10 -> CH3 Duty cycle: 75%
PA7  -> CH1N
PB0  -> CH2N
PB1  -> CH3N
================================================================================